Airbag Jack Safety Guide

In this article, I’m going to give you a sneak peek into the airbag jack safety guide.

It’s easy to adjust your body position during long trips by leaning against the door, using it as an armrest, or sleeping with your head against it. However, if the side airbag deploys in an accident, this adjusted body positioning could result in serious neck injury.

1. Preparing

Start by turning off the engine.

Clear a space beneath the vehicle for the airbag jacks to be placed, making sure there are no sharp items on the ground. Look under the vehicle for any sharp, hot, or moving parts that could damage the jack. The airbag jack should now be unfolded and laid out so that it lifts evenly when inflated. For a quicker recovery, the jack can be inflated with either a compressor or the car’s exhaust. Connecting the compressor or exhaust hose before placing the jack may be easier.

2. Positioning

The airbag jack kit includes two mats that provide extra protection where it’s needed. If there are sharp objects that cannot be moved, one of these should be placed on top of the jack and the other beneath it. As soon as the jack is in place, make sure all bystanders are clear of the car and switch on the engine.

Learn More

3. Jacking Up

To avoid exhaust leakage of gases, put the cone at the end of the hose over the vehicle exhaust and apply pressure. Keep an eye out for potential burns from hot components. Never get under a car that has an airbag jack supporting it.

4. Letting Down

The airbag jack will keep pressure while the area beneath the wheels is filled to get you out of trouble after the vehicle is raised out of the bog. By twisting the airbag connector to release the pressure, you can now lower the vehicle. Don’t remove the hose in one direction, as doing so will cause the vehicle to fall out of control.

The car may be easily driven out of the bog after the jack is removed; a little back and forth swaying of the gears may help prevent the vehicle from digging.

While this product is great for vehicle recovery, it should not be used for wheel changes or repairs. In the unlikely case that the airbag jack fails, deflation will occur instantly with no warning of the vehicle falling. A solidly fixed jack and adequate safety measures should always be used for any wheel change repairs.

The bottom-line

Be mindful that you sit at a safe distance from the airbag. By adjusting your seat, you can ensure you have at least 10 to 12 inches of clearance between you and the steering wheel. Also, don’t cross your legs if you’re in the passenger seat. Your crossed leg will be blown towards your hip if the bag blows.

If you want to provide high-accuracy weighing for pallets and containers, you can order pallet scales from johnsonscale.com.